Different Fan Angle 532nm Green Line Laser Module

Not the same as a quite green laser pointer device, whenever users are tarrying to make extremely clear and accurate line alignment onto different targeting surfaces, it is a quite nice experience for users to make good use of a 532nm green line laser module. It is projecting the most sensitive color green laser light from 532nm green DPSS laser system. Every time it makes good use of qualified optic lens with different fan angle, after quite easy connect with an external DC input power supply, this laser line generator is always workable with highly clear and stable green reference line projection onto targeting surfaces efficiently.

Designed with external electric power source, not the same a quite simple alkaline battery power source made green laser pointer, this green line laser module is adopting continuous electric power source of DC input power supply. Different from a temporary dot positioning device, only if it is supported by 5V or 9V operating voltage, this laser line generator is workable with continuous green reference line projection from beam aperture. It is workable within wide range output power of 5mW to 100mW. Besides its use of quite close line projection, high power green laser up to 50mW to 100mW is also getting quite satisfied line positioning result for high lighting and greater distance as well.
When line alignment work is processed onto different targeting surfaces, 532nm green line laser module gets different fan angles from 10 to 110 degrees. Especially in occasion of the most accurate line alignment at quite long work distance, it is equipped with qualified separate crystal lens. It is generating non Gaussian distribution green laser light from beam aperture, and then generating a highly fine green reference line with the same brightness from middle part towards both ends. If users are only in need of formal accuracy line projection, qualified glass coated lens made laser line generator is enough to get ideal line aligning accuracy as expected.
After quite easy adoption of a laser alignment mounting bracket, even though green reference line is pointed onto hard reaching places, 532nm green line laser module enables quite easy installation. Within freely installed distance within three dimension and freely installed distance of 3 meters, this alignment laser line is easy to reach any targeting surface, without any appearance of laser light decay or dim in continuous work. When the most powerful green laser light and thermal energy are produced from high power green laser module up to 50mW to 100mW, only after correct wearing of laser safety glasses, it achieves highly secured line alignment onto targeting surfaces perfectly.

Adjusted Focus Optics 515nm Green Cross Line Laser Module

Under operation with advanced 515nm green laser diode tech applied green cross line laser module and quite easy connect with an external DC input power supply, it is becoming a quite nice experience for to make highly clear and immediate green vertical and horizontal lines projection with accurate 90 degrees. It is different from any manual or mechanical cross line printing or drawing works. Whenever cross laser alignment tools gets continuous electric power source and getting correct choice of optic lens degree and output power, it is able to work with accurate 90 degrees two perpendicular lines with accurate 90 degrees in distance.

The use of 515nm green cross line laser module is very convenient and easy. It is being made with very small size tube diameter of only 16mm or 26mm. When it is getting quite higher output power up to 30mW to 50mW, owing to its quite high thermal consumption, it is should be equipped with much higher operating voltage of 9V DC input power supply so as to achieves bright and visible enough green cross line source in distance. Whatever kind of working surfaces it is pointed, this compact structure made cross laser alignment tool enables quite easy installation within the maximum distance of 3 meters, and then achieving highly clear cross line source projection as long as 25 meters.
No matter what kind of working surface it is pointed, 515nm green cross line laser module is required to generate different cross line length and thickness in use. The real selection of cross line aligning work allows freely selected optic lens degree from 10 to 110 degrees. Under operation with different cross line length within 0.5 meter to 6 meters, after correct selection of output and optic lens degree, this 515nm green cross laser always obtains the most satisfied measuring results within the lowest time consumption.
According to basic learning of required cross line length, thickness and work distance from laser beam aperture to targeting surfaces, 515nm green cross line laser module would be measured and experimented, and then getting correct recommendation of output power and optic lens degree. Noncontact green cross line is easily reaching any targeting surfaces, also leaving no track on raw material surfaces. Under basic attention to the most powerful green laser light and thermal energy, under proper wearing of laser safety glasses and avoiding eye exposure to laser beam aperture, this industrial alignment laser achieves highly secured measurement precisely.

Focus Adjustable 5mW Green Cross Laser Alignment Module

In any working occasion where users are trying to making extremely clear and accurate cross line targeting, even though there is quite serious need of the most accurate cross line targeting, it is always a quite nice experience to make use of a 5mW green cross laser alignment. It is generating highly visible green laser beam at several mile away, and then generating highly clear green vertical and horizontal lines within formal close distance and inner room. This green laser module gets even better performance than formal green laser pointer device. After quite easy connect with an external DC input power supply, it is able to work with continuous and highly stable green cross line source for close distance efficiently.

When users are trying to make highly clear cross line targeting in close distance, it is still getting high level of accuracy cross line targeting. The operation of qualified glass coated lens is performing much better than formal plastic coated lens. It is generating high linear quality cross line source from beam aperture, also getting featured advantages of high fineness and high straightness. According to easy selection of glass lens degree of 10, 15 and 110 degree, after generating different cross line length within 0.5 meter to 6 meters, this cross laser module is always making quite satisfied cross line aligning result onto desire working surfaces.
According to quite easy connect with a DC input power supply, under operation with Class IIIa 5mW green cross laser alignment, it should be equipped with much lower operating voltage of 5V 1000mA electric current, which is just workable with continuous green cross line source continuously. Owing to quite special design with adjustable focus, after very easy screw of laser beam aperture, high intensity green laser light is immediately converted into highly fine green cross line thickness.
NO matter what kind of working surface it is pointed, 5mW green cross laser alignment is operated as an accessory part. This 16mm diameter made laser device enables quite easy installation and adjustment on any industrial machine or device, which is also leaving no track on any raw material surface. The special adoption of laser alignment mounting bracket is allowing quite easy mount of laser device on any targeting surface, and freely installed distance within the maximum work distance of 3 meters. According to correct measurement of cross line length, thickness and work distance from beam aperture to targeting surface, when cross laser module gets correct recommendation of output power and optic lens dgree, it achieves no mistake measurement on all targeting surfaces efficiently.

Constant Projecting Glass Lens Green Dot Laser Alignment

Until the time users are trying to make quite accurate and precise dot projection in distance, it’s not any longer applicable for users to still use formal laser pointer or any other manual dot projecting tool. In order to get expected dot aligning accuracy on multiple targeting surfaces, under operation of green dot laser alignment, it is always being made with excellent inner thermal emitting system and constant electric power source, it is able to make continuous and highly stable green reference dot projection in distance.

When dot measuring work is required to continuous for quite long time, green dot laser alignment is selecting inner metal heat sink cooling system inside durable aircraft used aluminum alloy housing tube. It is always getting even better thermal emitting than formal air or water cooling. Even though it is used for quite low temperature, it is necessary to make easy preheating of laser module tube about 30 seconds, it recovers its bright enough green reference dot projection immediately. Once green laser light is pointed on black, red or dark color working surface, part of green laser light is absorbed, thus alignment laser should be selected with higher output power so as to achieve highly visible and bright dot projection as expected.
Under formal use of external DC input power supply, not the same as a simple green laser pointer, this green dot laser alignment always gets quite larger space leaving for tube cooling down. In addition, once green reference dot projection is processed for quite various working environments, it is selecting the most durable aircraft used aluminum alloy housing tube. When it is accepting wide range operating temperature and any harsh occasion of mechanical moving or calibration, this compact structure made green laser module keeps excellent laser light cycling use and highly stable green reference dot projection in long term use.
Under operation as an accessory part and being used with laser alignment mounting bracket, green dot laser alignment is always allowing quite easy and convenient installation and adjustment. Under quite easy adjustment of laser beam focus and laser dot targeting direction, it makes the most satisfied dot positioning results on any vertical or horizontal surface easily. Once serious thermal energy and powerful green laser light are generated from high power alignment laser, it is a key issue to be cautious with laser safety and remember to wear laser safety goggles until achieving easy and safe alignment constantly.

10 to 110 Degree Blue Line Laser Alignment

If users are not able to make extremely clear and fine enough lien projection, no matter it is pointed for quite close distance or other hard reaching places, it would be quite nice experience to seek help with a blue line laser alignment. It is projecting the most intense and moderate bright blue laser light from beam aperture. Under condition that this line laser module is perfectly designed with thermal emitting system and constant electric power source, it is a becoming a genuine industrial stabilized laser device, applied for all kinds of long term and long distance line projection in distance efficiently.

When line projecting work is processed at quite long work distance, not simply limited within formal hand reaching, this blue line laser alignment is employing import 445nm blue laser diode as its beam emitting source. Beginning with high power up to 50mW to 100mW, after easy selection of inner metal heat sink cooling system and copper made laser diode, after production into a laser line module device, it is always obtaining increasing beam stability and highly clear blue reference line projection in continuous work.
Not the same as a quite simple blue laser pointer, instead of the use of formal alkaline battery power source, blue line laser alignment is selecting continuous electric power source of DC input power supply. It is keeping continuous blue reference line projection. In addition, when it is keeping work continuously within 8 to 10 hours, after quite enough time and space leaving for laser tube cooling down, this alignment laser achieves excellent laser light cycling use and increasing beam stability in constant line projection work. In addition, under harsh occasion of high temperature and strong corrosion, blue line laser module is still keeping quite nice laser light cycling use and extremely clear line projection in long term use.
Whatever kind of working surface it is pointed, blue line laser alignment is being made with qualified glass coated lens or separate crystal lens. Within freely selected optic lens degree of 10 to 110 degree, it is generating different line length within 0.5 meter to 6 meters. The most important design part of adjustable focus ensures highly rapid blue laser light concentration and the most rapid blue reference line projection immediately. If human eyes are making eye exposure to powerful laser light and thermal energy, it is a key issue to wear laser safety goggles so as to achieve easy and free measurement constantly.

The Most Intense Beam Green Dot Laser Module

If there is not a quite efficient method for users to make extremely clear and accurate dot projection on multiple targeting surface, either it is used for close distance or long distance, it is always a quite nice solution for users to adopt green dot laser module. It is projecting the most easily absorbed green laser light from 532nm green DPSS laser system. Whenever it is getting quite sensitive color green laser light from beam aperture and quite low laser beam divergence, this dot laser alignment tool is just workable with the most compact size and the most accurate dot positioning result in distance efficiently.

When dot alignment is processed on multiple targeting surfaces, gene dot laser module always gets quite nice experience. It is generating the most sensitive color and easily absorbed green laser light from 532nm green DPSS laser system. Owing to its quite special laser beam mode of TEM00, green laser dot is available with good round shape dot projection. When users are making quite easy screw of adjustable cylindrical lens, after immediate green laser light concentration from beam aperture, it makes the most precise and accurate dot projection on any vertical or horizontal surfaces immediately.
Under easy selection of DC input power supply, not the same as a quite simple alkaline battery power source, green dot laser module makes continuous green reference dot projection. It is accepting selected operating voltage of 3V or 9V operating voltage electric power source, which is supporting wide range output power of 5mW to 100mW. This dot laser alignment tool is not only used for quite close distance and inner room, but also producing highly clear dot positioning result for quite long distance and high lighting working occasion etc. Only if red laser dot projection is used without sunlight, it would make quite satisfied dot positioning result constantly.
Under the assistance of laser alignment mounting bracket, even though some of working place is not easy to reach, green dot laser module can still be used conveniently. According to quite special designed electric wires extension for both laser module and DC power supply, usually within the maximum installation distance of 3 meters, this alignment laser is allowing quite convenient use as an accessory part, and then generating highly accurate dot projection on any vertical or horizontal surface immediately. Whenever laser dot aligning work is proceed with high power up to 50mW to 100mW, users should only wear proper laser safety glasses and avoid eye exposure so as to achieve the most satisfied dot positioning result perfectly.

Larger Line Length Blue Line Laser Alignment

In any type of precise device manufacturing work fields, there is always quite serious need of the most accurate line projection on multiple targeting surfaces, it would be quite challenge job for users until selecting a quite intense powerful blue line laser alignment. It is generating the most intense blue laser light from high power blue laser diode. Under condition that it is equipped with qualified optic lens, selected with larger optic lens degree, this laser line generator is just easily obtaining highly fine and long line length in distance efficiently.
The generated beam from blue line laser alignment is from 445nm blue laser diode. Owing to the adoption of import 445nm blue laser and beginning high power up to 50mW to 100mW, it is getting even more stable performance than formal laser pointer device. In addition, this direct diode emission laser line generator is being made with inner metal heat sink cooling system and cooper made blue laser diode. When laser line aligning work is processed for quite long time, it is always getting superior nice thermal emitting and maintaining up to 80% beam stability in daily line targeting work of 8 to 10 hours and long serving lifetime in continuous work.
In order to get highly fine and long line length on various targeting surfaces, blue line laser alignment is selecting glass coated lens or separate crystal lens. When it is getting the largest optic lens degree of 110 degree, it is achieving extremely long line length of 6 meters in about 2 meters work distance. For the most important of all, according to special use of adjustable focus, after quite easy screw of adjustable cylindrical lens, this alignment laser gets the most rapid laser light concentration and the clearest blue reference line projection in distance easily.
After a series of quite strict laser beam stability tests up to 24 hours and being used by professionals or skilled users, blue line laser alignment is maintaining excellent laser light cycling use in continuous work. It is a necessity for make easy measurement of line length, line thickness and work distance, this alignment laser would be selected with correct output power and optic lens until achieving quite satisfied line positioning result. Whenever it is used as an accessory part, with the assistance of laser alignment mounting bracket and being use under high attention to thermal energy from high power blue laser module, after correct wearing of laser safety goggles, it achieves the most secured line positioning result perfectly.

Industrial Stabilized 445nm Blue Line Laser Alignment

In any working occasion where users are trying to make highly clear line projection at quite long work distance, not the same as a quite simple laser pointer device, laser tech engineer is making great technical innovation of 445nm blue line laser alignment. It is generating a modifying laser light in type of a highly straight blue reference line from beam aperture. When laser line generator is selected with correct output power and optic lens degree, it is always able to work with highly clear and fine line instruction on any raw material surfaces efficiently.

This blue line laser alignment is only projecting moderate brightness blue laser light from 445nm blue laser diode. It is not as bright as a 473nm blue DPSS laser system, however, this direct diode emission laser line module is not only achieving even more stable and reliable performance, but also getting quite low production cost. Although it is employing 445nm blue laser diode as its beam emitting source, beginning with high power up to 50mW to 100mW, however, it is only able to be made with 9V DC power supply and achieving bright enough blue reference line in continuous work.
Usually the genuine line projecting work is processed on different working distance and working environments. It is required to maintain good beam stability in continuous work. Laser tech engineer is designing blue line laser alignment with the most durable structure of aircraft used aluminum alloy housing tube. In addition, after production of this line laser module, there is also quite strict laser beam stability tests. A series of strict tests, including super rapid electric current adding, alternative high and low temperature changing test and up to 24 hours aging preventing test, it is always maintaining excellent laser light cycling use and long serving lifetime in proper use.
Whatever kind of working surface it is pointed, owing to freely selected optic lens degree within 10 to 110 degree, selected from glass coated lens or separate crystal lens, blue line laser alignment is achieving various line length and line thickness in continuous work. This industrial stabilized alignment laser enables basic measurement and experiment, within freely installed distance of 3 meters, it is making quite convenient and immediate blue reference line projection in continuous work. Only if users are paying special attention to powerful thermal energy up to 50mW, only after proper wearing of laser safety goggles, it gets secured line alignment constantly.

No Labor Force Input Economy Red Dot Laser Alignment

When users are trying to make quite accurate dot projection on multiple targeting surfaces, including those of complex working environments, none of manual or mechanical dot measuring tool can be comparable with economy red dot laser alignment. When it is getting continuous electric power source from DC input power supply, after correct selection of operating voltage, this dot laser module is making continuous and highly stable red laser dot projection immediately. The genuine laser dot projection is not affected by manual labor force input. After correct selection of output power and proper adjustment of laser beam focus, this red laser module achieves no mistake dot projection easily.

In order to make continuous dot projection stably, laser tech engineer has just designed this economy red dot laser alignment with super nice thermal emitting system. It is projecting red laser beam directly from inner 650nm red laser diode. When it is selected wide range output power within 5mW to 100mW, although it is only projecting moderate brightness red laser beam from beam aperture, however, it is still able to make highly clear red reference dot projection for quite long work distance and formal lighting working occasions etc.
When economy red dot laser alignment is adopting external electric power source, not the same as inner alkaline battery power source, it is making continuous red reference dot projection in use. It is reserving enough space as its thermal emitting system. At the same time, according to the design of inner APC, ACC driving circuit board, even though there are quite serious electric current and thermal energy produced from beam aperture, however, this alignment laser is not affected by constant increasing temperature, and keeping the best working condition from laser tube burning out or damage.
According to the selection of accessory part of laser alignment mounting bracket, economy red dot laser alignment is making quite convenient installation and dot targeting on any working surface. When laser tech engineer is design this alignment laser with special electric wires extension for both red laser module and DC power supply, within the maximum installation distance of 3 meter, it is making no barrier dot projection and the most precise dot positioning result on any vertical or horizontal surfaces. Only if users are paying high attention to the most intense and powerful red laser light and thermal energy, after correct wearing of laser safety goggles, this industrial 650nm red laser module achieves highly secured dot projection perfectly.

Immediate Positioning Glass Lens Red Cross Laser Alignment

Unless the use of a quite simple triangular meter or blocking board, in order to make real cross line targeting easy and convenient, it is just a quite nice experience to make use of glass lens red cross laser alignment. It is generating quite intense red laser light directly 650nm red laser diode. After production into a real cross laser module, only after its correct equipment of qualified glass coated lens, it is generating quite complex two perpendicular lines with accurate 90 degrees. Only if this red laser is properly installed and adjusted to correct position, it makes sure of high level of accuracy cross line targeting in distance easily.

In multiple industrial precise device manufacturing work fields, no matter close distance or long distance, the genuine operation with red cross laser alignment is not affected at all by manual operation. It is making use of 650nm red laser diode as its beam emitting source. Beginning with wide range output power of 5mW to 100mW, after correct equipment with 3V or 9V DC input power supply, it is generating highly clear red laser beam and red cross line source in distance. Under operation of high power red laser module up to 50mW to 100mW, unless it is pointed under sunlight, it makes highly clear red vertical and horizontal lines generation with accurate 90 degrees in distance.
The special use of qualified glass coated lens has just made red cross laser alignment different from any formal dot or line printing device, but would have to work with even more complex two perpendicular red lines with accurate 90 degrees. When it is getting selected optic lens degree of 10, 15 and 110 degree, after produced with selected cross line length within 0.5 meter to 6 meters, this cross laser module assures quite satisfied cross line targeting result for all industrial precise device manufacturing works. It is providing convenient cross line positioning result for laser alignment for screen printing system, military targeting, heat transfer machine and laser medical therapy works etc.
Whenever red cross laser alignment is used for continuous cross line targeting, users also have no need to worry about laser tube cooling down or burning out. For the most important of all, under operation with APC, ACC driving circuit board, whatever kind of output power it is selected, under increasing temperature and serious electric current impacting, this alignment laser is perfectly protected, and maintaining the most reliable two perpendicular lines generation with accurate 90 degrees constantly. Any time users are paying special attention to powerful red laser radiation and reflection, after proper wearing of laser safety goggles, this cross laser module achieves safe and clear measurement perfectly.

Precisely Aligned 445nm Blue Cross Laser Alignment

When users are not able to make extremely clear and fine cross line source projection in distance, it is not helpful at all to adopt forma manual or mechanical cross line measuring device. It is always quite hard job to avoid mistake caused by manual operation, thus formal devices are substituted by advanced laser diode tech applied blue cross laser alignment. The generating laser beam form 445nm blue laser diode is direct and quick. When this cross laser module is being made with super nice thermal emitting system and constant electric power source from DC input power supply, it is just workable with extremely stable and clear blue vertical and horizontal lines projection in distance easily.

The real cross line targeting with blue cross laser alignment is employing import 445nm blue laser diode as its beam emitting source. It is achieving even more stable performance than formal laser devices. At the same time, although it is not as bright as 473nm blue DPSS laser system, after production into a direct diode emission cross laser module device, it is always keeping even more stable and reliable cross line alignment in continuous work. After its easy connect with DC input power supply, it is keeping continuous blue cross line targeting. However, only if there is enough time leaving for laser module tube cooling down, within continuous operation of 8 to 10 hours, this blue cross line laser just keeps excellent laser light cycling use and extremely long serving lifetime in use.
Under operation with the best quality glass coated lens, available with selected lens degree of 10, 15 and 110 degree, blue cross laser alignment is projecting different cross line length within 0.5 meter to 6 meters. It is only a moderate brightness laser module device, unless it is pointed under sunlight, it is also making highly clear cross line targeting under formal lighting and long distance of 25 meters. Every time users are making easy screw of adjustable cylindrical lens, the most intense blue laser light is temporarily concentrated into super fine blue cross line source in use.
Whatever kind of output power it is selected, owing to the beginning high power up to 50mW to 100mW, blue cross laser alignment is producing extremely powerful thermal energy from beam aperture. The most important design part of APC, ACC driving circuit board is preventing increasing temperature and electric current impacting, which is just achieving the most stable blue cross line projection in long term use. Any type of eye exposure to powerful laser light and thermal energy might cause serious hurt to human eyes. User should remember to wear professional laser safety goggles and install alignment laser on correct machine or device, this blue cross line laser achieves perfect aligning result.

Adjusted Thickness 635nm Red Dot Laser Module

In order to make the most precise dot alignment out of hand reaching, without the use of any simple laser pointer or other manual dot projecting device, it is just the best experience to make use of a laser diode tech applied device of 635nm red dot laser module. It is projecting the purest red laser light from 635nm red laser diode, emitting much brighter and more visible laser beam than same output power made 650nm red laser device. When laser tech engineer is designing this dot laser alignment tool with full consideration of thermal emitting, it is just able to work with highly stable and reliable red reference dot projection in distance.

It is not easy for user to make extremely clear dot alignment at quite longer work distance than formal hand reaching. However, 635nm red dot laser alignment is uniquely designed with beginning output power of 5mW to 100mW. It is emitting the most visible and the brightest red laser light from 635nm red laser diode. When it is getting quite special laser beam mode of TEM00 and quite small size laser dot emission, this dot laser module is always effective enough to get the highest level of accuracy dot projection in distance efficiently.
When dot alignment is processed on different targeting surfaces, without any worrying of hard reaching or other complex working environments, 635nm red dot laser module is being made with quite small size tube diameter. It is only able to be made with 16mm or 26mm diameter, designed with aircraft used aluminum alloy housing material and copper made laser diode core part, this compact structure made red laser module always achieve superior nice thermal emitting and increasing stability in continuous dot aligning work. Even though red laser dot projection is proceed under quite lower or higher temperature, it is still keeping highly bright red laser light emission and highly clear dot generation as long as 25 meters.
According to quite easy installation and adjustment of dot targeting direction and easy screw of adjustable cylindrical lens, 635nm red dot laser module gets the most rapid red laser light concentration and the clearest red laser dot projection immediately. When it is getting the most important design part of APC, ACC driving circuit board, whatever kind of output power it is selected, this alignment laser always gets perfect protection of laser module tube from increasing temperature and serious intense electric current impacting, and then achieving the most stable dot projection and long serving lifetime in constant use. Only after proper wearing of laser safety goggles and avoiding eye exposure to laser beam aperture, this industrial red dot laser achieves perfect alignment constantly.

Competitive Price Economy Red Line Laser Alignment

In any working occasion where users are trying to make quite easy and immediate line projection on various targeting surfaces, without any prior line positioning with formal square meter, blocking board or other mechanical line aligning device, it is the most preferred choice for users to make use of economy red line laser alignment. The genuine laser line targeting work is not only used for close distance, but also processed at quite long work distance. This laser line generator is projecting moderate brightness red laser light from 650nm red laser diode, being made with excellent thermal emitting and constant power source from DC power supply, it is able to work with extremely clear and fine red line projection in distance easily.

The desired line targeting with economy red line laser alignment would be processed for quite long time, while still in serious need of highly stable and reliable red reference line projection in use. According to the use of external DC input power supply, without any time spending on alkaline battery power source changing, under wide range electric current within 100V to 240V, this laser line generator is always applied for majority working occasions, and then making sure of highly stable and reliable red laser line projection in continuous work.
When laser line is pointed on multiple working surfaces, economy red line laser alignment is being made with the most qualified glass coated lens or separate crystal lens. It is generating red laser light directly from 650nm red laser diode. Equipped with the best quality optic lens, either Gaussian or non Gaussian distribution red laser beam it is pointed from laser beam aperture, this line laser module is also generating highly fine and straight red laser line projection in use. Every time users are making basic measurement of line length, line thickness and work distance, laser tech engineer will recommend it with correct output power and optic lens degree until achieving the most precise red laser line projection easily.
Under operation with special electric wires extension for both economy red line laser alignment and DC input power supply, under quite high temperature and strong corrosion resistance and freely installed distance of 3 meters, it is always making quite convenient red line projection in distance easily. This compact structure made laser line generator allows quite convenient adjustment of glass cylindrical lens, thus producing extremely fine red reference line in distance easily. Under professional wearing of laser safety goggles and avoiding eye exposure to powerful red laser radiation, this alignment laser always assures easy and safe measurement.

Innovated Designed 808nm Infrared Dot Laser Alignment

Under quite special use of long wavelength made 808nm infrared dot laser alignment, even though the real dot measurement is processed under night vision working occasion, it should only be equipped with night vision device, which is able to make highly clear and accurate IR reference dot projection under night vision. When 808nm infrared laser module is generating invisible IR laser light from beam aperture, after quite easy connect with night vision device and external DC input power supply, it is converting highly intense infrared laser beam into highly clear infrared laser dot projection clearly.

This 808nm infrared dot laser alignment is only used as an accessory part, only if it is used under special night vision device, such as a CCD camera, black and white camera or infrared laser camera, it is able to generate high intensity infrared laser light, and then producing highly clear infrared reference dot in distance immediately. It is always used for night vision dot measuring work fields, such as military targeting, laser medical therapy, surveillance and intelligence system. When IR dot projection is processed at quite long work distance, this 808nm infrared laser module gets wide range output power of 5mW to 100mW. Employed by import 808nm infrared laser diode and inner thermal emitting system, it is always obtaining superior nice thermal emitting and highly stable IR laser dot projection in continuous work.
Comparing with any other visible laser devices, 808nm infrared dot laser alignment gets even higher photoelectric ability up to 80%. Equipped with the best quality glass coated lens, it is keeping work with quite high laser beam transmittance, and then producing highly clear IR laser dot projection in distance. For distance, formal low power infrared laser module within 5mW to 200mW is applied for 50 meters work distance IR dot projection, while high power infrared laser up to 200mW to 500mW would make extremely clear IR dot alignment as long as 100 to 1000 meters in use.
Whatever kinds of output power it is selected, nothing can be captured from laser beam aperture. This 808nm infrared dot laser alignment is being made with APC, ACC driving circuit board. The intelligent feedback system is always preventing serious electric current impacting and constant increasing temperature of laser module tube. Under continuous IR laser dot projection within 8 to 10 hours, under perfect protection of infrared laser module tube from burning out, this alignment laser just achieves highly stable performance and long serving lifetime. Whenever users are paying special attention to powerful IR radiation and reflection, after proper wearing of infrared laser safety goggles, this IR dot laser module achieves easy and safe alignment perfectly.

The Best Performing 635nm Red Laser Diode Module

Under easy adoption of laser diode tech, after production into a real practically used dot aligning tool of 635nm red laser diode module, after quite easy connect with an external DC input power supply, it is making continuous and highly clear red reference dot projection in distance efficiently. It is generating high purity red laser light from 635nm red laser diode, which is emitting at least 3 times brighter laser light than formal 650nm red laser device. Whenever it is projecting quite small size and good round shape red laser dot, it is just making the highest level of accuracy dot positioning result in distance.

It is spending a lot of time on prior dot positioning work, while not able to avoid mistake by manual operation. The external DC input power supply is always providing continuous electric power source. It is getting much better performance than formal alkaline battery power source, which has no need to make battery change and also makes sure of continuous red reference dot projection on various targeting surfaces. When 635nm red dot laser gets wide range output power of 5mW to 100mW, only if it is equipped with 3V or 9V operating voltage DC input power supply, it is keeping highly clear and bright red laser dot projection in continuous work.
When 635nm red laser diode module and DC input power supply are being made with extending electric wires with high temperature and strong corrosion, it is not only keeping highly stable dot projection, but also enable easy installation within the maximum work distance of 3 meters. This red dot laser is quite compactly designed, however, it is still keeping superior nice thermal emitting. The operation of APC, ACC driving circuit board is preventing serious electric current impacting and protecting dot laser alignment tool from constant increasing temperature in continuous work.
In process of the most precise dot alignment on different targeting surfaces, including those of quite hard reaching places, 635nm red laser diode module is easily installed on any other machine or device, projecting the clearest red laser dot for all high lighting and long distance working occasions easily. This compact structure red dot laser with correct output power and adjustment of laser beam focus just makes sure of easy dot positioning result for laser marking, laser engraving, drilling system, and lab experiment work field etc. Under occasion of high attention to powerful red laser light and thermal energy from high power red dot laser, after proper wearing of laser safety goggles, this red dot laser module achieves easy and free measurement perfectly. 

The Easies Positioning Green Cross Line Laser Module Review

In current laser medical therapy, military targeting, heat transfer machine and other a large variety of application fields, under high level of accuracy cross line alignment, it is a major for users to seek the assistance of laser tech engineer. The creation of green cross line laser module is getting modifying laser light in type of two perpendicular lines with accurate 90 degrees. This cross laser alignment tool is different from a simple laser pointer, only after perfect equipment with qualified glass coated lens and inner cooling system, it is just achieving highly clear and accurate green cross line source in distance easily.

The projecting laser beam from 532nm green cross line laser module is highly visible and bright, which is also getting the most sensitive green laser light emission from laser beam aperture. Under occasion that it is getting beginning wide range output power of 5mW to 100mW, it is projecting extremely intense green laser beam at several miles far away, and forming into a highly fine and straight green reference line under quite long distance and high lighting as well. When this cross laser alignment tool gets quite special laser beam mode of TEM00, green cross line source is keeping the highest straightness, also getting no need to worry about laser light decay or dim in continuous work.
In multiple precise cross line alignment application fields, 532nm green cross line laser module would be used for quite long time, with high level of beam stability in practical use. The operation with inner metal heat sink cooling system is just a super nice configuration with aircraft used aluminum alloy housing material, applying for wide range operating temperature and various harsh working environments. When this cross laser alignment tool gets superior nice thermal conductivity, being used with the daily maximum operating time of 8 to 10 hours, it is just able to achieve excellent laser light cycling use and highly reliable green cross line projection in use.
When green cross line laser module is being used as an accessory part, within the maximum installing distance of 3 meters, it is making quite convenient and easy green vertical and horizontal lines projection with accurate 90 degrees immediately. Under high attention to the most powerful green laser light and thermal energy from beam aperture, after proper wearing of laser safety glasses and basic avoiding of eye exposure to beam aperture, high power green cross laser is still making easy and safe alignment perfectly.

The Most Accurate 980nm Infrared Line Laser Alignment

If there is quite special need of accurate line projection under night vision illumination work fields, it is not helpful at all to only use formal manual or mechanical line measuring tool. Nothing can be seen by human eyes under such working occasion. When laser tech engineer is making great technical innovation of advanced 980nm infrared laser diode, equipped with qualified optic lens, it is forming into the most practically used infrared line laser alignment tool. Under quite professional work with night vision device, this infrared laser module makes sure of the most satisfied IR line aligning result under night vision illumination work fields effectively.

When users are trying to make line alignment for night vision fields, such as surveillance, intelligence system or military targeting works, 980nm infrared line laser alignment is in need to make highly clear IR line projection at quite long distance. It is employing 980nm infrared laser diode as its beam emitting source, owing to the use of import IR laser diode tech and wide range output power of 100mW to 500mW, this IR laser line generator is keeping work with the most powerful and intense IR laser light emission, and also generating highly clear IR reference line projection in distance immediately.
Under quite special use of qualified glass coated lens or separate crystal lens, no worrying about laser light decay or dim in continuous work, 980nm infrared line laser alignment is keeping work with quite high laser beam transmittance and highly clear IR reference line projection in distance easily. IR line laser is required to make continuous line alignment under night vision, including those of quite harsh working environments as well. According to quite strict laser beam stability tests up to 24 hours, under proper use by skilled users and professionals, it is always keeping quite high laser beam transmittance and highly clear IR line alignment in long term use.
Within wide range output power of 100mW to 500mW, 980nm infrared line laser alignment projects invisible infrared laser beam and IR reference line from beam aperture at all. It should not be used as a separate part, under the assistance of laser alignment mounting bracket and freely installed distance within 3 meters, this laser line generator is making quite easy and convenient IR reference line projection in distance easily. When powerful IR laser radiation and reflection are generated from beam aperture of IR laser module device, besides proper wearing of laser safety goggles, this alignment laser just achieves highly secured measurement perfectly.

The Easiest Measured 808nm Infrared Dot Laser Alignment

If there is quite serious need of accurate enough dot measuring result under night vision illumination work fields, it is not workable at all to still keep in mind of manual or mechanical dot measuring tool as expected. The operation of long wavelength made 808nm infrared dot laser alignment makes great technical innovation of 808nm infrared laser diode tech. After quite professional equipment with a night vision device, such as a black and white camera, infrared laser camera or CCD camera, this infrared laser module is always workable with highly clear and accurate IR laser dot projection under night vision illumination work fields efficiently.

When dot measuring work is processed for night vision illumination work field, owing to its much longer wavelength than any visible laser devices, infrared dot laser alignment gets quite satisfied result as expected. It is generating quite high photoelectric ability infrared laser beam from laser beam aperture. Owing to up to 80% photoelectric ability and wide range output power within 5mW to 400mW, infrared laser module is generating even more visible and intense infrared laser beam, and then generating clear enough IR laser dot as long as 100 to 1000 meters in use.
Under operation of import 808nm infrared laser diode and inner metal heat sink cooling system, 808nm infrared dot laser alignment is not limited for temporary dot positioning work, but have to maintain highly stable dot aligning performance in continuous work. The inner design part of glass coated lens has just assured super high laser beam transmittance. When IR laser dot aligning work is processed for quite harsh working environments, owing to quite special design of glass window in front of laser beam aperture, this infrared laser module is keeping highly reliable performance, including harsh occasion of dust or moisture working condition etc.
Under quite special use of laser alignment mounting bracket, 808nm infrared dot laser alignment is allowing quite convenient installation, and then making easy IR dot projection for multiple application fields, including military targeting, laser medical therapy, surveillance and intelligence system etc. No matter what output power it is selected, human eyes cannot capture any IR laser light at all. This accessory part should only be used with high attention to IR radiation and reflection from beam aperture, after professional wearing of infrared laser safety goggles, this alignment laser just achieves safe and highly accurate IR dot projection perfectly.

Easy Pointing DC Power Pro Red Dot Laser Alignment

Not always relying on professional skills and extra time spending on prior dot positioning work, in order to make quite easy and convenient dot projection on any raw material surface, it is just a quite easy job to seek help from a pro red dot laser alignment. When laser diode tech engineer is not simply limited to develop simple laser pointer device, after perfect consideration of thermal emitting system and external electric power source, this laser diode module is always becoming a real and industrial stabilized line measuring device. After proper selection of output power and adjustment of laser beam focus, this red laser device would make the easiest dot positioning result in distance.

Without the use of simple sticker, laser pointer or other manual dot projecting device etc, pro red dot laser alignment is always getting good performance under continuous dot projecting work. It is adopting import 635nm red laser diode, comparing with formal 650nm red laser diode, it is just getting at least three times brighter laser light from beam aperture. When this 635nm red laser module is getting good laser beam mode of TEM00 and quite low laser beam divergence of less than 1mard, it is always workable with the quite small size and good round shape red dot projection in use.
According to the employment of import 635nm red laser diode, available with 5mW to 100mW, pro red dot laser alignment is projecting highly visible red laser beam at several miles far away. However, when dot aligning work is proceeding at quite long distance, red reference dot is becoming larger, which is not fulfilling accurate enough dot projection as expected. In various industrial dot aligning work, this alignment laser is allowing easy screw of adjustable cylindrical lens, which enables immediate red light concentration and the most accurate red dot projection in distance. Usually within the maximum work distance of 25 meters, it is assuring clear and accurate enough dot positioning result as expected.
When pro red dot laser alignment is processed for multiple industrial application fields, being made with high duration aircraft used aluminum alloy housing tube, it is achieving excellent thermal conductivity and highly stable red reference dot projection, including harsh working occasion of mechanical shocking, calibration or moving etc. After quite easy installation and adjustment of laser beam focus and dot targeting direction, within freely installed distance of 3 meters, this alignment laser makes quite convenient dot generating result. Under operation of high attention to quite intense and powerful red laser light and reflection, after proper wearing of laser safety goggles, this red laser module achieves easy and safe alignment perfectly. 

The Best Performed 650nm Red Laser Line Generator

Not simply limited for temporary dot positioning works, in order to get clear and accurate enough line alignment on various targeting surfaces, it is just a quite nice experience for users to adopt a 650nm red laser line generator. It is a quite different experience for user to use this laser diode tech applied line alignment tool. When it is keeping work with direct red laser light emission from 650nm red laser diode. Owing to quite mature laser diode tech and quite long developing history made laser diode, after production into a real line laser alignment tool, it is just keeping highly reliable red reference line projection and long serving lifetime in continuous work.

When line alignment work is processed for quite long time, it should have to maintain super strong industrial stabilization. This 650nm red laser line generator is regarded as an industrial stabilized line alignment tool. It is only being made with 16mm or 26mm diameter tube. However, after giving up formal alkaline battery power source, this red laser module is adopting external DC input power supply, which is getting the largest space reserving as its cooling system. Under formal continuous red reference line projection work, within daily operating time of 8 to 10 hours, only if there is enough time leaving for laser tube cooling down, this red line laser is just maintaining excellent laser light cycling use and highly reliable line projection in use.
Under proper equipment with glass coated lens or separate crystal lens, in any possibility of continuous line alignment work, this 650nm red laser line generator is keeping high linear quality red line projection. Especially in occasion of highly clear line alignment in distance, separate crystal lens made red laser module is generating non Gaussian distribution red laser light from beam aperture, and then producing the finest red line in use. Red reference line is keeping the same line brightness from middle part towards both ends, without any worrying of laser light dim or decay within the maximum working distance of 25 meters.
According to quite easy adoption of laser alignment mounting bracket, including those of quite difficult reaching places, 650nm red laser line generator is making quite easy and convenient line targeting in use. It is bearing quite harsh moving, calibration or other harsh working occasion, and then achieving highly reliable red reference line projection in industrial precise device manufacturing works etc. Under occasion of high power red line laser module is used for quite long distance, under serious emission of powerful red light and thermal energy, users should only remember to wear laser safety goggles until achieving safe and free alignment constantly.

Highly Uniform Beam Distributed Green Line Laser Module

Not always stopping in mind of primary line printing or line drawing works, in order to get high efficiency and high accuracy line alignment on various targeting surfaces, it is becoming a quite efficient solution for users to adopt green line laser module. It is no doubt a super great technical innovation of advanced 532nm green DPSS laser tech. When line alignment work is processed for quite long time, this laser line generator is being made with enough space reserving as its thermal emitting system. Whenever this compact structure made green laser gets proper installation and line targeting direction, it gets no mistake line projection for any industrial precise device manufacturing works perfectly.

It is quite hard job for users to get clear enough line alignment at much longer distance than formal hand reaching. However, without any limitation by manual operation, green line laser module is bringing users quite different experience for any industrial precise device manufacturing works. Employed by wide rang output power of 5mW to 100mW, this line laser alignment tool is projecting highly visible green laser beam at several miles far away, and also forming into highly fine and straight green reference line in distance as well.
Under the selection of the best quality separate crystal lens, not the same as formal plastic coated lens or glass coated lens, the genuine line alignment with green line laser module gets no appearance of laser light decay or dim in continuous work. It is an industrial stabilized laser line alignment tool, under a series of quite strict laser beam stability up to 24 hours, it is always showing clearly of a highly straight and fine green reference line in use. In addition, when this laser line generator is projecting no Gaussian distributed green laser light from beam aperture, even though green line is pointed at quite long distance, it is still available with high fineness and high brightness from middle part towards both ends.
Under operation with freely selected optic lens degree of 10 to 93 degree, under highly clear line alignment on multiple raw material surfaces, green line laser module is always workable with highly accurate line projection as long as 25 meters. Unless it is pointed under sunlight, this alignment laser would also make clear line projection under high lighting as well. Every time users are making quite easy adjustment of laser beam focus, it is getting super rapid green light concentration and the clearest line generation for any precise device manufacturing works etc. Under proper wearing of laser safety glasses and easy installation on correct device, this line laser alignment tool achieves clear and quick alignment constantly.

Adjustable Focus DC Power Blue Line Laser Alignment

If users are trying to look for quite efficient and easy line measurement on multiple targeting surfaces, not simply limited for formal hand reaching, none of formal manual line printing or drawing device can be comparable with advanced laser tech applied blue line laser alignment. It is projecting quite intense and powerful blue laser light form 445nm blue laser diode, owing to quite mature laser diode tech and perfect inner thermal emitting system, it is becoming a quite practically used laser line generator device. Whenever this compact size designed blue laser is properly installed and adjusted to correct position, it is always making quite easy and highly clear blue reference line projection on any vertical or horizontal surface easily.

On multiple targeting surfaces, ether quite short or long line length emitting in distance, blue line laser alignment is being made with inner glass coated lens or separate crystal lens. It should be used for quite long time and maintain excellent laser light cycling use in continuous work. However, owing to the adoption of selected optic lens degree within 10 to 110 degree, it is generating different blue line length within 0.5 meter to 6 meters in distance. This laser line generator is also adjustable focus. In process of continuous line aligning work, it should be used with quite easy screw of adjustable cylindrical lens, which has just made rapid blue laser light concentration and highly clear blue reference line projection in distance immediately.

Whatever kind of working surface it is pointed, under high level of accuracy line projection work, blue line laser alignment makes immediate blue reference line projection after easy connect with DC input power supply. Not the same as formal alkaline battery power source, it is accepting wide range electric current within 100V to 240V, which is just applied for a lot of application fields. In addition, under quite special design of electric wires with high temperature and strong corrosion, this blue laser linegenerator is applied for multiple working occasions and also keeping highly reliable performance in long term use.

Within wide range output power up to 50mW to 100mW and special equipment with APC, ACC driving circuit board, this blueline laser alignment is preventing serious intense electric current impacting and quite rapid temperature increasing of laser tube. When this alignment laser gets perfect protection of inner tube from burning out or damage, it is maintaining excellent laser light cycling use within of 8 to 10 hours. Under quite serious attention to intense and powerful blue laser light and thermal energy, after proper wearing of laser safety goggles, this 445nm blue laser module achieves wonderful measurement perfectly.

Immediate Projecting Green Line Laser Module Review

Not simple relying on professional skills and quite long time spending on manual line drawing or line printing work, more and more factory workers and engineers would prefer to make line alignment with advance laser tech applied green line laser module. This is an industrial stabilized laser line alignment, whenever it is easily connected with external electric power source and installed correctly on required machine or device, it is always making highly clear and fine green reference line projection in distance easily and immediately. Whenever users are making correct operation of this green laser device, it is just making sure of no barrier and no mistake line alignment constantly.

Not any longer limited for formal hand reaching distance, in order to get clear enough line alignment for both long distance and high lighting working occasion, green line laser module is always getting freely selected output power within 5mW to 100mW. It is in need to maintain highly stable line alignment in multiple working occasions. As a result, after giving up formal alkaline battery power source, it is not only employing external DC input power supply, but also leaving the largest space reserving as its metal heat sink cooling system, which would make continuous and highly stable green laser line alignment.
Under condition that users are making the most precise line alignment on different targeting surfaces, green line laser module is employing the best quality glass coated lens or separate crystal lens. Laser tech engineer is always requiring laser users with correct line length, line thickness and work distance from beam aperture to targeting surface. When laser line generator is getting correct recommendation of output power and optic lens degree, it will make highly clear line alignment in multiple application fields, including laser cutting, textile garment processing, sand milling, wood, stone and other raw material processing works etc.
Within wide range optic lens degree of 10 to 110 degree, either formal gaussian distribution or non Gaussian distribution green laser light it is emitted, this green line laser module is always keeping highly fine and good linear quality green reference line projection in use. Within freely installed distance of 0.3 meter to 3 meters, this industrial stabilized laser line generator is always operated as an accessory part, which is always making quite easy and clear green reference line projection on any vertical or horizontal surface easily. Under condition that users are paying high attention to powerful green light and thermal energy, after proper wearing of laser safety glasses, it is always making no mistake line measurement perfectly. 

Selected Lens Degree made Pro Red Line Laser Alignment

If there is not quite efficient method for user to make easy and clear line measurement out of hand reaching, users should not only rely on primary manual or mechanical line measuring device. However, under the selection of pro red line laser alignment and easy connect with an external DC input power supply, it is making continuous and highly clear red reference line projection in distance easily. This 635nm red laser module is generating high purity and laser beam divergence red laser light, equipped with the best collimated optic lens, it is assuring the finest and the most accurate red reference line projection in distance efficiently.

This pro red line laser alignment keeps work easily after connecting with external electric current supply. The adoption of AC/DC adapter is always accepting wide range electric current within 100V to 240V, after converting into much lower operating voltage of 3V or 9V DC power source, it is keeping continuous and highly bright red reference line projection in distance easily. It is supporting 635nm red laser module within wide range output power of 5mW to 100mW, unless it is pointed under sunlight, it is able to make highly clear red reference line projection for close distance, long distance and high lighting working occasion etc.
According to quite special equipment with qualified glass coated lens or separate crystal lens, in process of continuous line measuring work, this pro red line laser alignment is keeping high linear quality and high beam transmittance red reference line projection in distance. In multiple industrial precise device manufacturing work fields, in order to maintain excellent industrial stabilization, this laser line generator has just passed quite strict laser beam stability up to 24 hours. Under proper use and continuous line alignment within 8 to 10 hours per day, it is getting excellent laser light cycling use and highly reliable red reference line projection in distance easily.
When line measuring work is processed on multiple raw material surfaces, owing to selected optic lens degree of 10 to 110 degree, this pro red line laser alignment is generating different line length within 0.5 meter to 6 meters. Before selecting this laser line module device, users should get basic learning of line length, line thickness and work distance, thus getting perfect selection of output power and lens degree. When this compact structure made alignment laser is properly installed and adjusted of both line thickness and line targeting direction, it makes the best line measuring performance for any industrial and high tech works perfectly.

Constant Positioning Non Gaussian Beam Green line Laser Module

Whenever users are trying to make extremely clear and quick line alignment on multiple raw material surfaces, it is just never a kidding job until selecting a quite professional line measuring tool as expected. Without any time spending on prior line drawing or line printing work, under operation with green line laser module and easy connect with a DC input power supply, it is always making sure of highly clear and fine green reference line projection in distance easily. Every time this laser line generator is operated as an accessory part, after proper installation on any industrial machine or device, it is making the easiest and the clearest green reference line projection for both long distance and high lighting effectively.

This green line laser module is mostly used as an accessory part of any other industrial machine or device. When it is trying to make continuous line alignment, it should be equipped with external DC input power supply. When it is making continuous green reference line projection on different targeting surfaces, within wide range output power of 5mW to 100mW, after correct equipped with 3V or 9V operating voltage electric power source, this laser line generator is keeping continuous and highly clear green reference line for long distance and high lighting working occasions. In addition, under condition that the genuine green laser line alignment is processed without sunlight, after selection of high power up to 50mW to 100mW, it would also produce highly clear line alignment for high lighting easily.
When line alignment is pointed for modern time industrial precise device manufacturing work fields, it might be used for laser cutting, textile garment processing, sand mill, stone, wooden board processing works, this green line laser module would have to generate different line length and line thickness in distance. Under quite special equipment with separate crystal lens, under emission of non Gaussian distribution green laser light emission from beam aperture, this laser line generator is obtaining high uniformity green reference line in use. When line alignment is processed at quite long distance, it is still keeping highly fine green line projection, keeping the same brightness from middle part towards both ends.
In process of highly clear line alignment on multiple raw material surfaces, green line laser module gets freely selected optic lens degree within 10 to 93 degrees. It should only be selected with correct output power and optic lens degree, which will obtain the clearest green reference line projection within the maximum work distance of 25 meters. For the most important of all, after quite easy screw of adjustable lens, this alignment laser gets temporary laser light concentration and the finest green line projection in distance. Under selection of proper 532nm wavelength preventing laser safety glasses and avoiding eye exposure to beam aperture, this laser line generator ensures safe and clear line generation for all industrial line aligning works perfectly.

Continuous Pointing Glass Lens Green Line laser Alignment

In order to get highly clear and quite easy line projection on multiple raw material surfaces, it is not helpful at all for user to only use simple line drawing or printing device. When users are selecting green line laser alignment, owing to quite bright laser light emission from 532nm green DPSS laser part, available with quite low laser beam divergence, it is obtaining the finest and the highest straightness green reference line projection from beam aperture. Whenever this compact structure made laser line generator is properly installed and adjusted, unless it is used under sunlight, it will make easy and accurate line projection on any raw material surfaces effectively.

It is always full of challenge to get quite clear line alignment out of hand reaching and still keeping high work efficiency on multiple raw material surfaces. However, under condition that the genuine line measuring work is processed with a green line laser alignment, after correct equipment with 3V or 9V DC input power supply, it is keeping continuous green reference line projection from beam aperture easily. It is just supporting it within wide range output power of 5mW to 100mW, which is not only make highly clear line projection within hand reaching, but also getting highly clear line generation under long distance and high lighting as well.
When line measuring work is processed under multiple working environments, this green line laser alignment is being made with the most durable structure with aircraft used aluminum alloy housing tube. It is preventing any type of harsh working occasion, such as mechanical shocking, calibration or moving etc. In addition, in continuous green reference line projection work, this laser line generator is accepting wide range operating temperature and also workable with highly stable performance. Under special equipment with metal heat sink cooling system and APC, ACC driving circuit board, it is always getting perfect preventing of serious electric current impacting and increasing temperature. When green laser module is used within 8 to 10 hours per day, after enough time leaving for laser tube cooling down, it is keeping the most reliable performance and long serving lifetime.
Whatever kind of working surface it is pointed, in process of the clearest line generation, this green line laser alignment is allowing freely selected optic lens degree from glass coated lens or separate crystal lens. It is keeping work with high linear quality and high straightness green line projection from beam aperture. Whenever this alignment laser is properly selected with output power and optic lens degree, after proper screw of adjustable cylindrical lens, it is getting quite satisfied line thickness and highly clear green reference line projection as long as 25 meters. Whenever users are paying special attention to intense laser light and thermal energy, after correct wearing of 532nm wavelength preventing laser safety glasses, this green laser module achieves safe and stable measurement constantly.