Separate Crystal Lens 808nm Infrared Line Laser Module Review

 If the genuine line alignment is processing under all night version fields, it is not able to rely on primarily used visible laser device or other manual line aligning tool. At the same time, after continuous technical innovation of 808nm infrared laser diode tech, equipping with qualified separate crystal lens with different fan angles, it is developing into a quite practically used device of 808nm infrared line laser module. In occasion that IR laser alignment gets proper installation and equipment with other night version device, it makes sure of highly fine and clear infrared line alignment for all night vision illumination fields.

From the very beginning design with 808nm infrared line laser module, it is being made with good cooling system. According to the use of metal heat sink cooling system and import 808nm infrared laser diode, configured with highly durable aircraft used aluminum alloy housing tube, it is always getting superior nice thermal emitting and increasing laser beam stability in continuous use. Either it is pointing under low or high temperature, without any affect by other harsh working environments, this infrared laser line generator is just performing with the best quality and high intensity infrared laser light emission, and highly clear infrared line alignment as long as 100 to 1000 meters.

Being made with the best quality separate crystal lens, different from any formal plastic coated lens or glass coated lens, this 808nm infrared line laser module is performing the best. It is projecting non Gaussian distribution infrared laser beam, and highly uniform infrared reference line in use. For the most important of all, infrared laser line is also available with the same brightness from middle part towards both ends, also getting no appearance of laser light decay nor dim in continuous use.

Whatever kind of night version line aligning work fields, under basic measurement and experiment of IR line length, fineness and work distance, this 808n infrared line laser module gets correct selection of separate crystal lens degree. Available with wide fan angles of 10 degree to 93 degree, this infrared alignment laser makes quite satisfied IR line alignment for a large variety of application fields, including military targeting, laser medical therapy device, night hunting and infrared laser sight etc. Only after quite easy adjustment of laser beam focus and line projecting direction within three dimension, after correct wearing of 808nm infrared laser safety goggles, it just makes sure of highly secured and highly fine IR line alignment in all occasions effectively.

5mW-100mW 635nm Red Dot Laser Module Review

 Under operation with constant technical innovation of 635nm red laser diode tech and basic use of electric power source, it is developing into a quite practically used device of 635nm red dot laser module. It is performing with high purity and high brightness red laser light directly from 635nm red laser diode. Owing to its advanced use of qualified glass coated lens and good cooling system, being configured into quite durable metal housing tube, this 635nm red laser alignment just allows high quality red laser light source emission, and highly clear and stable red reference dot projection at various working distances effectively.

The usual use of 635nm red dot laser module is continuing for quite long time, and also maintaining highly stable dot projection in continuous use. The advanced use of metal heat sink cooling system just gets even better thermal emitting than formal air or water cooling system. Employing import 635nm red laser diode up to 5mW to 100mW, it is being made with different size tube diameter. For instance, low power red laser adopts 16mm diameter tube, while high power red laser alignment up to 30mW to 100mW just selects 26mm diameter tube. Only if it gets superior nice thermal emitting, it is just able to work with highly stable red dot projection within continuous work of 8 to 10 hours per day.

Owing to the use of qualified glass coated lens, performing much better than formal plastic coated lens, this 635nm red dot laser module is performing with high transmittance red laser light emission, and highly clear red dot projection. Once it is operating by skilled users or professionals, it just gets no appearance of laser light decay or blur, but just keeps clear and stable enough red dot alignment in long time use. For the most important of all, after quite easy adjustment of laser beam focus and laser light concentration, this alignment laser achieves efficient laser light conversion, and the clearest dot alignment at various work distances.

On basis of the use of a laser alignment mounting bracket, this accessory part of 635nm red dot laser module just allows no track and no barrier dot indication onto various working surfaces. Noncontact red alignment laser dot is making quite satisfied dot indication for both industrial and high tech dot measuring work fields. Under operation with high power red dot laser, after high attention to thermal energy hurt to human eyes and correct wearing of laser safety goggles, it makes highly secured and quick dot measurement in all application fields.

Qualified Light Source of 532nm Green Laser Line Generator

 When users are trying to make highly clear line alignment, without any extra time spending on battery change or manual labor force input, it is always making quite easy operation after the use of a 532nm green laser line generator. It is emitting highly visible green laser beam and green reference line from beam aperture. Any time this compact structure made green laser module makes proper installation onto other machine or device, within the maximum installed distance of 3 meters, it just makes easy and highly clear green reference line projection onto various working surfaces effectively.

In process of continuous line alignment onto various working surfaces, 532nm green laser line generator should have to work with highly clear and fine line projection in different working environments. According to basic use of metal heat sink cooling system, after performing much better than air or water cooling system, it gets even better thermal emitting. The special use of aircraft used aluminum alloy housing tube is not only allowing operation within wide range operating temperature, but also making sure of highly stable and reliable green line alignment under other harsh working occasions, including mechanical moving, shocking and calibration etc.

Being made with the best quality separate crystal lens, after up to 24 hours aging preventing tests, this 532nm green laser line generator is always performing with high quality green laser light source emission, and high linear quality green line projection. It is projecting non Gaussian distribution green laser beam and up to 85% uniformity green line projection. In various industrial and high tech line positioning work fields, only after correct measurement and experiment of technical data, this green line laser module is performing with the most precise line positioning results. When it is keeping work within 8 to 10 hours, after professional use by skilled users or professionals, it is achieving perfect performance and no decay light line generation in continuous use.

Whatever kind of working surface it is pointing, after the use of an accessory part of laser alignment mounting bracket and extending electric wires, 532nm green laser line generator just allows the maximum installed distance of 3 meters, and convenient green reference line projection onto any vertical or horizontal surface. Any time it makes proper installation onto desired machine or device, after high attention to any thermal energy hurt to human eyes and proper adjustment of laser line fineness, this alignment laser just makes sure of the finest and the clearest line positioning results for all application fields.

High Efficiency 650nm Red Dot Laser Module

 Under continuous technical innovation of 650nm red laser diode tech, not simply developing into a red laser pointer, it just gets great work of a 650nm red dot laser module. It is emitting red laser beam directly from 650nm red laser diode. Not limited for temporary dot positioning works, owing to its special use of metal heat sink cooling system inside its durable metal housing tube, this red laser alignment just makes sure of superior nice thermal emitting, and increasing stability red reference dot projection in continuous use. In occasion that compact size tube made red laser makes correct installation and adjustment, it makes sure of high level of accuracy dot indication onto all working surfaces.

When 650nm red dot laser module makes use of durable aircraft used aluminum alloy housing tube, no matter it is pointing under low or high temperature, it is still keeping highly clear and visible red laser beam and red reference line projection from beam aperture. Available with wide range output power of 5mW to 100mW, after correct design of 16mm and 26mm diameter tube, this red laser alignment leaves enough space for tube cooling down, but also keeping highly stable and reliable red dot indication within constant work of 8 to 10 hours per day.

On basis of the use of the best quality glass coated lens and special use of glass window in front of laser beam aperture, whatever kind of working surface it is pointing, 650nm red dot laser module is projecting high transmittance red laser light, and highly clear red dot alignment at different work distance. It is just providing good dot aligning solution for a larger variety of application fields, including laser marking, laser engraving, military targeting and positioning, drilling system and other scientific research works etc. According to real work distance and required dot diameter, this red dot laser alignment should be selecting with correct output power and making proper adjustment of laser beam focus, thus making the most precise red dot projection as expected.

Whatever kind of working surface it is pointing, under operation as an accessory part and a laser alignment mounting bracket, 650nm red dot laser module makes sure of convenient installation, and easy dot projection onto any vertical or horizontal surface. Any time it makes quite easy adjustment of laser dot diameter and dot projecting direction, this industrial alignment laser makes the most precise red dot alignment in all working occasions. When it makes the use of a high power up to 50mW to 100mW, only after correct wearing of laser safety goggles and avoiding eye exposure to laser beam aperture, it makes high security and high speed dot alignment perfectly.