Showing posts with label berlinlasers. Show all posts
Showing posts with label berlinlasers. Show all posts

Monday, June 22, 2015

Laser Pointer Problems in Winter

When laser pointer is in formal work, it always requires certain operating environment. Generally its acceptable operating temperature is range from 10 degree to 40 degree Celsius. Some special laser pointers might be workable under operation temperature with range level of 0-40 degree Celsius, or even lower operating temperature.

In winter with low working environments, laser beam emission is always very weak, dim and not bright at the very beginning of starting up. After continuous pointing, usually after 10 seconds, laser beam brightness recovers to normal value. For instance, a APC green laser pointer gets the best performance under 25 degree Celsius. When operating temperature is quite lower, laser operators should make preheating of laser pointer. Low temperature might greatly affect formal working of laser pointers.

Especially below zero temperature, the laser pointer light might appear weak, and or not even able to start. In winter, laser users should pay special attention to surrounding environment, so as to assure formal operation of laser pointers.

When operating temperature of laser pointer is quite lower than expected, it is very important to make preheating of laser tube. Especially head part of laser pointer, should be preheated inside coat, or hands. If laser pointer starts up in room working environment, it will recover to formal or near formal working environment.

Sometimes there is heavy fog in winter, laser pointer operators should also pay special attention to operating environment. Users should prevent dust of fog attached to the lens of laser pointers, affecting the quality of the laser spot, thus indirectly affect the beam thermal efficiency.

Caution with laser pointers operation

Whenever users are pointing any powered laser pointers, it should be not pointed continuously. The extremely high temperature of laser tube might cause burning out of internal laser crystal and laser diode. The recommended operation time of laser pointer should be 30 seconds pointing, and then 10 seconds cooling down.

Laser users should always obey proper operation measures of laser pointers. It is not allowed to point laser pointer in public, animal and human eyes and body, moving vehicles, air planes etc.

When the selecting output power of laser pointer is higher than 30mW, users should remember to wear laser safety goggles in order to make perfect protection of eyes. Never try to stare at laser radiation and laser reflection. Any explosion of laser beam might cause serious hurt to eyes and retina seriously.

Link source: http://www.berlinlasers.com/laser-tech/laser-pointer-problems-in-winter/

Sunday, December 7, 2014

Review of Industrial Design Red Dot Laser Alignment

I have got the chance to use red dot laser alignment in those of textile processing industry, when I use it to make dot positioning for button targeting. This kind of dot measurement tool uses 650nm red laser diode as reference dot emitting source, providing highly visible and highly bright red dot projection on required working surfaces precisely and accurately. In order to make it workable for long term continuous dot projection on required working surface, this kind of industrial alignment laser is always specially designed with outside configured DC input power supply or battery box. In addition, this kind of dot measurement tool can also be equipped with other tools to make industrial dot measurement precisely. This red dot laser alignment can also be used separately or as an accessory part in operation. Whatever kind of operating occasions, it is always making the most stable and reliable dot measurement successfully on required working surfaces.
This industrial dot projecting red laser alignment adopts the most durable aircraft used aluminum alloy body material. In order to make efficient protect of its outside shell in multiple working environments, this alignment laser adopts oxygenized surface treatment. According to different output power users have selected, it is always being designed with different size of laser tube. Usually this red laser alignment range from 5mW to 30mW is always being designed with 16mm diameter, since it has no need to pay special attention to its inner design. When users are using this low powered alignment laser to make continuous dot projection, users have no worrying about constant improving temperature of its inner laser diode and electric circuit board. When users are making continuous dot measurement, the projecting energy will not be powerful enough to destroy its inner structure, thus affect its serving lifetime.
red dot laser alignment
red dot laser alignment
On condition that users are choosing high powered red laser alignment for longer distance dot projection, laser tech professionals have to pay high attention to its stability in continuous dot measurement work. As a result, this kind of powerful alignment laser is always being made with larger size of laser diameter of 26mm. This large size dot projecting laser gadget has enough space for thermal emitting. It adopts metal heat sink thermal stabilization control system to control its inner temperature in constant dot projecting work. Even though this 635nm red laser alignment has made quite long time continuous dot projection, it has just maintained super stable and reliable dot projection on required working surfaces efficiently.

When this 635nm pro red dot laser alignment is pointed at different working surfaces, it will project different light brightness dot. Usually dark color operating surface has better light absorption result, while light color surface has much weaker affect. The time users are making selection of this kind of industrial alignment laser, users should be always cautious enough to its operating surface material, color and exact targeting distance until getting the best dot projection result successfully.

Monday, November 24, 2014

100mW Red Line Laser Alignment for Stone Cutting Positioning

High powered 100mW red line laser alignment is very advanced laser tech applied line measuring tool, which is widely used in modern time stone cutting processing work. Owing to its special laser light emitting from 650nm red laser diode, this high powered laser gadget is always able to project super visible red reference line with high brightness and noncontact red laser light. It is always being designed with 26mm diameter laser diode, equipped with enough space metal heat sink thermal control system, allowing highly stable and reliable line projection on required working surfaces precisely and accurately. Users can always use this advanced laser tech applied alignment laser to make high efficient line projection on required working surfaces freely.
red line laser alignment

On considering of its high output power emitting, laser tech professionals have paid high attention to its design of thermal treatment during its production. In order to make sure of its perfect thermal emitting performance, this advanced line measurement tool is being made with large size laser tube. Formal low powered alignment laser is always being made with 16mm laser tube, but it is designed with large 26mm diameter laser tube. This large space is specially designed for thermal treatment design, which can not only make sure its line projection more stable and reliable, but also ensuring its serving life improve more than 50 percent or even higher. As a result, even though users are making long time continuous line projection, it is no need of worrying of temporary laser diode burnt out. On contrary, this high powered red line laser alignment always maintains super stable and reliable red reference line projection in 24 hours continuous line projection operation.

Besides its quite important configuration of enough space for thermal stabilization control system, this red line laser alignment also pays high attention to its internal design of 650nm red laser diode. Employed by import 650nm red laser diode and connected glass coated optic lens, the serving lifetime of this 100mW red line laser alignment is usually at least 3000 hours longer than common lasers. With the perfect combination of compact size electric circuit board of intellectual feedback configuration, this line projecting alignment laser is always in the best working condition. Its inner 650nm red laser diode is perfectly controlled and protected in stable red reference line projection conditions. Its inner laser tube temperature is very stable and constant no matter how long it has lasted in continuous line projection work. Its stability is at least 40 percent higher than common ones. On condition that users are looking for long distance line measurement method, this red line laser alignment is just the best choice to get the best line projection result.

Sunday, November 16, 2014

Red Line Laser Alignment for Moderate Accuracy Positioning

Red line laser alignment is a specially designed 650nm red laser diode made product, which is mostly used by workers to make line projection for conditions of where moderate level of accuracy and precision is required. This kind of industrial alignment laser adopts traditional 650nm red laser diode as reference line emitting source, equipped with the qualified glass coated optic lens, gathering the most advanced red reference line targeting on all possible working surfaces precisely and accurately. This 650nm red laser is not as visible as 532nm green laser, but its bright enough red reference line is bright enough to instruct workers to make simple line projection in those of industrial measurement working fields such as textile processing, laser cutting, metal processing, PCB board processing etc. If there is no super strict line projection precision and accuracy, this red line laser alignment is enough for users to get ideal line projection within the required targeting distance or height.
red line laser alignment
In order to make line projection more easily and conveniently, red line laser alignment always adopts simple design of external DC input electric power supply. This kind of outside configured electric power can provide continuous electric for this line projecting alignment laser in order to make long time undisturbed line projection on required working surfaces.
In order to make this line projecting laser alignment tool applicable for those of industrial working fields at different targeting distance, this line laser alignment is always precisely designed with different output power range from 5mW until 100mW. Certainly different output power laser is always equipped with different operating voltage. Low powered 5mW line laser alignment is generally operated by 3V operating voltage, while high powered laser alignment with an output power of up 50mW is always adopting higher operating voltage of 4V. The highest operating voltage supporting line laser alignment is not exceeding 5V. Once users have decided the operating output power of alignment laser, the operating voltage of DC input power supply should perfectly equips with its output power. Otherwise, it will not be an easy job to get ideal line projection on required working surfaces precisely and accurately.
In order to make perfect line projection on required working surfaces, red line laser alignment has perfect absorbed the advantages of good monocles, good coherence, good direction and high brightness of any laser diode products. Once this industrial designed alignment laser is pointed at a certain surfaces, it will project a super long red reference line complying with users requirement. Owing to its superior advantages of high straightness, this red alignment laser can be widely used in industrial detection, industrial machinery, micro control equipment, electric powered tools and engineer project etc.